PRODUCT FEATURES
■ Continuous or step-by-step, high capacity
■ High efficiency and low emission
■ High pressure spray and wind shear
■ Circulating filter and oil-water separation
■ High-performance air exhaust system
CLEANING PROCESS
Degrease spraying—Air water removing—Spraying rinse I—Air water removing—Spraying rinse II—Air water removing—Pure water rinse—Hot wind drying—Cooling
※ OPTIONAL EQUIPMENT：
Robote loading & Unloading, Swage water treatment, Ultrasonic cleaning, Electroysed water device, Magnetic separator, Agent detecting & feeding device
■ High pressure spray to remove the pollutant
■ Multi-spot nozzles layout, all-round spraying
■ Precious filter, no blockage with nozzles
■ Multi-functional spray with cleaning agent and rust-proof agent
■ High pressure wind shear
■ No liquid taken to next step
■ Equipped with independent high pressure blower, less compressed air needed
■ Multi-spot air nozzles layout
■ Powerful suction force, efficient dehumidifier
■ Condense and recycle liquor, reducing water drainage
■ Perfect drying based on hot air
■ Fresh hot air based on fresh air inlet
| Model | KWS-Q4000FJ |
|---|---|
| Dimension | 8600×1900×2450mm |
| Process | Spraying Rinse—Air water removing—Hot wind & Vaccum drying |
| speed | 0.5~2m/min |
| Reservoir tank | 800L |
| Load | Max 40kg |
| Index | 120s/pcs |
| Application | Press, Forging, Powder metallurgy, Fhinishi machining, Casting etc. |
| Products | Machining parts, Engine case etc. |
| Model | KWS-Q3000FJ |
|---|---|
| Demension | 3200×3500×2150mm |
| Process | Spraying—Rust-proof Spraying—Air water removing—Hot wind drying |
| Speed | 0.5~1m/min |
| Reservoir tank | 500L |
| Load | Max 30kg |
| Index | 60s/pcs |
| Application | Press, Forging, Powder metallurgy, Finishi machining, Heating treatment etc. |
| Products | Gear parts. |
| Model | KWS-Q5000FJ |
|---|---|
| Dimension | 18000×2100×2450mm |
| Process | SprayingⅠ—Spraying Ⅱ—RinseⅠ—Rinse Ⅱ—Hot wind drying |
| Speed | 0.8~1.5m/min |
| Reservoir tank | 1200L |
| Load | Max 100kg |
| Index | 20-40s/pcs |
| Application | Press, Forging, Powder metallurgy, Finishi machining, Casting etc. |
| Products | Heat sink plate, Press parts etc. |
| Model | KWS-Q7000FJ |
|---|---|
| Dimension | 21000×2100×2450mm |
| Process | Spraying Ⅰ—SprayingⅡ—RinseⅠ—RinseⅡ—Rust-proof—Hot wind drying |
| Speed | 0.6~1.5m/min |
| Reservoir tank | 1500L |
| Load | Max 2000kg |
| Index | 15s/pcs |
| Index | Press, Forging,Powder metallurgy, Finish machinig, Casting etc. |
| Products | Compressor body, Cylinder etc. |
